6S Power Distribution Board
Compact 6S power distribution board with fused ESC outputs, hall-effect current sensing and CAN telemetry for multirotor platforms.
- Serialised unit with test record
- Configure-to-order variants on the same architecture
- Engineering support from specification to integration
Overview
The RF-PWR-6S-PDB distributes battery power to up to eight ESCs and four regulated auxiliary rails from a single, protected board. Integrated hall-effect current sensing and a CAN 2.0B interface feed real-time power data to the flight controller. Every board is serialised and ships with a test report covering regulation accuracy, current-sense calibration and insulation resistance.
Key features
- Individually fused ESC channels
- Hall-effect main-bus current sensing
- Reverse-polarity protection on the main input
- Conformal coating for humidity and dust
- Serialised build record and test report
Applications
Specifications
| Input voltage | 14–26 V (4S–6S LiPo / Li-ion) |
|---|---|
| Continuous current | 120 A total |
| ESC outputs | 8 × fused, 30 A per channel |
| Auxiliary rails | 4 × regulated, 5 V / 12 V selectable |
| Current sensing | ±0.5 %, reported over CAN |
| Interface | CAN 2.0B, JST-GH |
| Dimensions | 80 × 80 × 12 mm |
| Mass | 45 g (without leads) |
| Operating temperature | −20 °C to +60 °C |
Representative values. Final specifications are confirmed in the quotation and interface control document.
Talk to an engineer about this product
Tell us about your platform, environment and quantity. We will confirm fit, propose any variant and send engineering, unit price and lead time separately.